DC 5V-24V 6 Channel DMX512 Decoder LED Controller, for RGBRGB RGBW RGBWW RGBWWW LED Strip Light, 4-Digit Display

Price: $22.90
(as of May 30, 2025 01:21:07 UTC – Details)

Product Description

Technical Parameters:

1. Input voltage: DC 5V-24V

2. Rated power: 2W

3. Output current: 10A for each port, totaling 60A.

4. Suitable for both low-voltage LED 7-color and single-color light strip/string/module, etc.

5. Dimming: 0-255 dimmable

6. Functions: Dimming, gradual change, stroboscopic,scanning and other changes.

7. Control mode: DMX512, self-propelled, single unit play, multiple units cascaded

8. DMX signal transmission port: Network port or XLR

9. Channel: 6CH/8CH

10. Size: 6.3in x 3.15in x 1.57in

11. Net weight: 0.88lb

CANRIA 6 Channels Driver RGB/RGBW/RGBWW/RGBWWW Hexad DMX512 Decoder Wiring Diagram

Wiring principles for controller signal Wires:

1. The distance from the controller port to the light strip should not exceed 20 meters.

2. The signal series connection between the lights shall not exceed 3 meters.

3. Signal cables use cat5e UPT.

4. Using cat5e UPT in series shall not exceed 20 meters long.

5. Both ends of the signal wire should be mark.

6. Signal wires and power lines casing pipe construction.

Network port for data transfer:

DMXIN and DMXOUT: 1.D+, 2.D-, 7-8.GNDVCC: Power+GND: Power-P1-P3: RGBP4-P6: RGB or WWW

Product size:

Length: (Top) 6.1 inches, (Bottom)6.89 inchesWidth: 3.11 inchesHeight: 1.53 inches

XLR socket connector panel:

3 Pin XLR male socket connect DMX512 light console 3 Pin XLR female socket connect DMX512 light console

Setting:

Connected to the DMX signal console: press – or + button to adjust the DMX address, then press SET button to save address setting. Not connected to the DMX signal console: press – or + button, adjust display speed of programs. MODE button can change the program, press SET can save programs and display speed.

Parameter display:

Connected to the DMX signal console: display DXXX, XXX from 001 to 512

Not connected to the DMX signal console: display XXPX, XX shows speed(01-99), X shows the built-in program sequence(1-7).
Save address setting, then you power on the decoder next time, it will automatically be your saved address. Save programs and display speed, then you power on the decoder next time, it will automatically be your saved built-in programs and display speed.

Applicable Scene

Bar

Stage

Concert

Landscape

INSTRUCTION(6CH DMX512 DECODER)

It has a pcs of 4 digit display screen. When connected to the DMX signal console, the decoder will display dXXX. XXX stands for three numbers and rang from 001 to 512. If not connected to DMX signal console, The decoder will display its built-in program. Display screen will show XXPX, The left XX shows speed. The right X shows the built-in program sequence. It has 7 built-in programs from P1-to P7. Its display speed rang from 01 to 99.The decoder can be set through 4 buttons. When it is connected to DMX console, press + or – button to adjust the DMX address. You can adjust what address you need, then press SET button to save address setting. It will automatically be your saved address when connected to DMX console next time.Without connecting the DMX console, the decoder will display its built-in programs. Through pressing + or – button, you can adjust display speed of programs. The program can be changed by pressing MODE button. Pressing SET can save programs and display speed. When you power on the decoder next time, it will automatically be your saved built-in programs and display speed.

Product Dimensions ‏ : ‎ 6.3 x 3.15 x 1.57 inches; 15.52 ounces
Item model number ‏ : ‎ DMX512-1990
Date First Available ‏ : ‎ September 13, 2021
Manufacturer ‏ : ‎ CANRIA
ASIN ‏ : ‎ B09G3F2MDC

1.Input voltage: DC5V-24V 2.Channel quantity: 6pcs channel 3.Output current: 10A/Channel 4.Size: 40*80*160MM 5.Weight: 0.4KG
4 digit display screen. When connected to the DMX signal console, the decoder will display dXXX. XXX stands for three numbers and rang from 001 to 512. If not connected to DMX signal console, The decoder will display its built-in program. Display screen will show XXPX, The left XX shows speed. The right X shows the built-in program sequence. It has 7 built-in programs from P1-to P7. Its display speed rang from 01 to 99.
The decoder can be set through 4 buttons. When it is connected to DMX console, press + or – button to adjust the DMX address. You can adjust what address you need, then press SET button to save address setting. It will automatically be your saved address when connected to DMX console next time.
Without connecting the DMX console, the decoder will display its built-in programs. Through pressing + or – button, you can adjust display speed of programs. The program can be changed by pressing MODE button. Pressing SET can save programs and display speed. When you power on the decoder next time, it will automatically be your saved built-in programs and display speed.
Decoder is designed to convert the universal standard DMX512/1990 signal into signal to control the RGB or RGBW or RGBWWW or RGB+RGB Flex Strips
High power output, 6 output channels, 10A per channel
DMX pass through and in/out connector for daisy chain configurations and RJ45 network port