Wireless 12V 2-Channel High Power Transmitter & Receiver On/Off Strobe Flash Pulse LED Light Bars

Price: $35.95
(as of May 14, 2025 06:51:47 UTC – Details)

Product Description

The ultimate wireless controller. This receiver with one remote control can turn on off your 12V device from up to 100 feet away.

Compatible with most LED lighting designed to operate at 10-14V DC. Requires 12V DC input such as a vehicle car battery or an AC-DC adapter output of 12V DC +/- 2V.

The 4 button remote control can do 4 different functions.

Function A, turns on your lights or shuts them off.

Function B, produces a zig-zag alternating flash pattern (3 modes).

Function C, produces a strobe function (3 modes).

Function D, produces a pulsing fade-on-fade-off (3 modes). When we say 3 modes, this means if you press the same button again, it changes the speed of that pattern.

Each channel can handle up to 200W assuming 12V DC. As an example, you can put a 180W light bar on each of its channels.

Wiring required. We recommend 16-gauge wire minimum for the wiring.

4 Button Remote Controller

Function A, turns on your lights or shuts them off.

Function B, produces a zig-zag alternating flash pattern (3 modes).

Function C, produces a strobe function (3 modes).

Function D, produces a pulsing fade-on-fade-off (3 modes). When we say 3 modes, this means if you press the same button again, it changes the speed of that pattern.

Dual Output

V+ is Positive

V- is Ground or Negative

Each channel can handle up to 200W assuming 12V DC

Please do not overload

Wire to Battery or any 12V Electrical Source

Can be used in vehicles, Bikes or Marine

Wires 2 lights or more as long as the power is within the maximum of 200W Total

Example: Two 20W Cube Lights as shown

2-Channel Output wireless controller. Input: 12V DC, Out: Up to 16 Amps/Channel or 32 Amps total
Long Range – Up to 100 Feet in most installs – Can vary depending on mounting location
High Power – Perfect for higher power LED lighting modules or LED Light Bars you want to make flash / strobe
4 functions – On/Off, Zig-Zag Flash, Strobe, Pulsing Fade On/Off
4 Button Remote Control (One Remote per controller) – Remote can be programmed to control multiple receivers if needed